Error codes with solutions for Brother Printers


How difficult it would be if you encounter with the printer issues without any error code. These error messages are the indication which is useful in troubleshooting Brother Printers fault and are helpful in assisting and resolving the issues.

On Brother printers, error messages can be seen on their LCD display and highlight the word 'error', 'error code ‘or an alphanumeric code (it is used for looking up the relevant information from the user manual).

In case if you are unable to decode the error messages, then get in touch with the experts and professionals of Brother Printers Support Canada for the assistance. Our team is well versed with technical knowledge and help to solve the issue without any time wastage.

THERE ARE SOME ERROR CODES MENTIONED BELOW ALONG WITH THEIR SOLUTIONS:


1. Error: E50 (Indicates malfunctioning of fuser unit)
For this, the user has to switch off the machine for 5 minutes and then turn it on again. Leave the device for 10 minutes and let it cover. If fault continues, then the fuser unit needs replacement.

2. Error: E52 (Malfunctioning of laser motor)
In this case, the user has to switch off the printer and on again. If still the error continues, then the user needs to replace the laser unit.

3. Error: E54 (malfunctioning of the main motor)
Switch off the printer and turn it on again. If the user still finds an error, then try turning on the printer without the toner unit and check if the motor now turns. If it persists the main motor need replacement.

4. Error: Replace PF Kit (It indicates that the paper pick-up separation pads and rollers need to be replaced)
The user might require engineer assistance as while replacing the paper feed kit the printer may experience paper jams.

5. Error: Clean Drum Unit (The printer has detected dust or loose toner around drum unit)
The user has to remove toner unit and then wipe off any toner or dust from the unit. At the front of drum unit, there is a blue tab. Keep sliding it from side to side to make sure to move it back to its original position. In message continues, and then the user has to replace the drum.

6. Error Code: 20, 21, 22, 23 (Indicates Laser Diode failure)
Turn off the printer and switch it on again. The laser unit needs replacement if error code persists.

7. Error Code: 32 (It signifies density sensor shutter failure)
The density sensor has a shutter to keep loose toner and dust away. The user needs to get in touch with an engineer to correct it as this can become defective.

These are some of the error which the user cannot resolve quickly as they require technical expertise.

Contact Brother Printer Support Canada at 1-844-888-3870 for better assistance and quick support
If the user is facing any other error codes apart from these explained above then don’t panic. Brother support number Canada for all the related queries. Our technicians are available at your service for 24/7. The user can also get in touch with us at our toll-free number 1-844-888-3870 for quick help and updates.

Comments